bottom-lock packaging design|packaging structure design

This is a very commonly-used tube box type with friction tuck taband snap lock bottom(or the Houghland), and interlocking dustflap and cover. For this box template, there are three tuck structures in the box template library of Packmage CAD, And there are also two offset ways of the dustflaps.

Features of packaging box design:
1 One paper after folding, and glue and seal the sides, make a tube type box.
2 The upper and down openging can seal the tuck structure of the reverse tuck.
3 Tuck lock structure: the tuck and the lock combined together can be very protective and not easy to open.
4 The snap lock bottom is also called bottom-lock packaging box.

Advantages and suages of packaging box design:
1 The tube structure must let the products in easily and not open automatically at the same tiem. This strcuture can be very protective.
2 This structure usually used for bottle products, such as cosmetic packaging.

Key points of end-lock packaging sructure design:
1 The box end must bear the weight of the inside goods, and also bear moves, pressures.
2 The design should be strong, simple. So, usually use the locks to protect the goods inside.
3 This kind of lock structure is simple, beautiful and economic. And it is the most commonly used structure in packaging. The cost is low. It is widely used in cosmetic packaging design, wine packaging design and food packaging design.