electronic product packaging design|end-lock structure

This is a tube box with friction tab top and snap lock bottom(snap lock also called Houghland), with interlocking dustflap and top cover.The upper and the lower tucks are the extensions of the same panel. There are three tuck structures and two offset ways of the dustflaps.

Features of packaging box design:
1 One paper after folding, and glue and seal the sides, make a tube type box.
2 The upper and down openging can seal the tuck structure of the reverse tuck.
3 Tuck lock structure: the tuck and the lock combined together can be very protective and not easy to open.
4 The bottom snap lock is also called automatic bottom lock packaging box.
5 Hanging board structure: the side panel of the box has extended hanging hole.

Advantages and suages of packaging box design:
1 The tube structure must let the products in easily and not open automatically at the same tiem. This strcuture can be very protective.
2 This structure usually used for bottle products, such as cosmetic packaging.
3 Hanging baard can display the product at different angles.

Key points of end-lock packaging sructure design:
1 The box end must bear the weight of the inside goods, and also bear moves, pressures.
2 The design should be strong, simple. So, usually use the locks to protect the goods inside.
3 This kind of lock structure is simple, beautiful and economic. And it is the most commonly used structure in packaging. The cost is low. It is widely used in cosmetic packaging design, wine packaging design and food packaging design.

Key points of electronic product packaging design:
1 Attach more importance to the protective structure during transportation.
2 Assemble different parts of the product can reflect the value of every part.
3 Packaging container material is often hard.
4 Packaging images are often pictures.